Цифровая печать. Вопросы, обсуждения, новостиОбсуждение и сравнение технологий цифровой печати и цифровых печатных машин. Ремонт и обслуживание цифровых печатных машин и принтеров. Xerox, Canon, Oki, Konica Minolta, Toshiba. Общение профессионалов, обмен опытом, отзывы. Расходные материалы и запчасти для Ксерокс, Кэнон, Коника и других принтеров.
E007-0201
Error of temporary prevention mode for full displacement of belt
(When a belt was displaced to the front side and could not move to the center, the displacement of the belt was not eliminated within one minute in the belt displacement temporary prevention mode.) Error of temporary prevention mode for full displacement of belt (When a belt was displaced to the front side and could not move to the center, the displacement of the belt was not eliminated within one minute in the belt displacement temporary prevention mode.)
Replace the fixing unit.
E007-0102
Pressure belt home position detection error
Replace the pressure belt HP sensor. Replace the pressure deviation control motor, DC controller PCB 2 (MAISY) and fixing unit.
в общем я и сам понимаю, что надо менять либо печку, либо валы в ней , либо ремень переноса. Вот потому сервисника и ищу, а то все это в комплекте почти как юзаная машина стоит
попробуйте обратиться в тпс сервис 8(495)7862550 , они по кэнонам спецы.Там есть сервисники, возьмут машинку на обслуживание.. или сделают разовый выезд, как вам удобней.